Publikacje KPT

Wysłane przez h.nguyen w

PUBLIKACJE PRACOWNIKÓW KPT

2025:

  1. Abramczyk Norbert ; Panasiuk Katarzyna ; Dudzik Krzysztof ; Żuk Daria: Analysis of the influence of the distribution of recyclate rubber layers in the sandwich composite on the identification of damage initiation stress of composite materials using the acoustic emission method, Advances in Science and Technology Research Journal 2025, vol. 19 (issue 9), s. 65-79.

  2. Abramczyk Norbert ; Jakubowski Piotr ; Żuk Daria ; Weryk Mateusz: The influence of adding rubber recyclate to laminated composites on the insulation from impact sounds,Vibrations in Physical Systems 2025, vol. 36 (no.1), art. no. 2025101, s.1-10.

  3. Nguyen Van Nhanh ; Chung Nghia ; Balaji G.N. ; Rudzki Krzysztof ; Hoang Anh Tuan: Internet of things-driven approach integrated with explainable machine learning models for ship fuel consumption prediction Alexandria Engineering Journal 2025, vol. 118, s. 664-680.

  4. Pham Thi Nga ; Nguyen Hoang Phuong ; Nguyen Van Nhanh ; Sirichokpokin Punarut ; Hadiyanto Hady ; Rudzki Krzysztof ; Nguyen Cao Thao Uyen ; Bui Viet Duc: Application of hybrid fuzzy-TOPSIS approach in enhancing green logistics towards sustainable maritime, Polish Maritime Research.

  5. Jasiński Krzysztof ; Murawski Lech ; Kluczyk Marcin ; Wierzchowski Jarosław ; Chodnicki Marek ; Lipiński Krzysztof ; Szeleziński Adam: Analysis of the possibility of using 3D printing for emergency replacement of damaged elements in the marine industry Applied Sciences, 2025, vol. 15 (issue 7), art. no. 3458, s. 1-18.

  6. Małgorzata Blicharska, Iwona Szmaglik, Oliwia Szulc, Lech Murawski, Adam Szeleziński, Krzysztof Jasiński: Analysis of the process of implementing the 5S method at ZPS "LUBIANA" S.A. Scientific Journal of Gdynia Maritime University.

  7. Małgorzata Blicharska, Iwona Szmaglik, Lech Murawski, Adam Szeleziński, Krzysztof Jasiński, Tadeusz Januszewski; Value stream mapping as a method enabling the optimization of the technological process based on the example of the ZPS "LUBIANA" S.A. porcelain tableware compan; Scientific Journal of Gdynia Maritime University.

  8. Łastowska Olga ; Polishchuk Vitaliy ; Poznanskyi Andrii: Thermomechanical parameters modelling of spring force elements made of shape memory alloys Materials 2025, vol. 18 (issue 13), art. no. 3055, s. 1-14.

  9. Łastowska Olga ; Jurczak Wojciech ; Starosta Robert: Influence of surface quality on corrosion resistance of stainless steel and aluminum alloy butt welds after innovative finishing Scientific Reports 2025, vol. 15, art. no. 27576, s. 1-16.

  10. Kubit Andrzej ; Aghajani Derazkola Hamed ; Jurczak Wojciech ; Ochałek Krzysztof ; Myśliwiec Piotr ; Macek Wojciech ; Łastowska Olga ; Podulka Przemysław ; Slota Ján: Efects of process parameters on dynamic and static load capacity of EN AW-2024-T3 aluminum alloy joints prepared by friction stir welding, Archives of Civil and Mechanical Engineering, 2025, vol. 25, art. no. 153, s. 1-23.

  11. Wierzcholski Krzysztof ; Miszczak Andrzej: Influences of viscosity and temperature variations across the thin lubricant layer on the cylindrical slide bearing parameters ; Wpływ zmian lepkości i temperatury w poprzek cienkiej warstwy smaru na parametry walcowych łożysk ślizgowych TRIBOLOGIA 2025, vol. 311 (no. 1), s. 87-102.

  12. Wierzcholski Krzysztof ; Miszczak Andrzej:Comprehensive random bio-lubrication of human joints ; Kompleksowe losowe bio-smarowanie stawów człowieka Tribologia 2025, vol. 313 (no. 3), s. 53-68.

  13. Wierzcholski Krzysztof ; Miszczak Andrzej: Hydrodynamic lubrication by sweat on human skin covered with a clothing material ; Smarowanie hydrodynamiczne potem skóry człowieka pokrytej materiałem bielizny Tribologia 2025, vol. 313 (no. 3), s. 69-82.

  14. Skorek Grzegorz: Development and improvement of calculation methods for the energy efficiency of hydraulic systems International Journal of Mechanical Engineering and Technology 2025, vol. 16 (issue 6), s. 31-47.

  15. Skorek Grzegorz: Computer simulation as a tool enabling comprehensive analysis of the energy behavior of the system International Journal of Mechanical Engineering and Technology 2025, vol. 16 (issue 6), s. 14-30.

  16. Hajdukiewicz Grzegorz ; Komarov Aleksander I. ; Orda Dmitry V. ; Panasiuk Katarzyna: Analysis of the impact of graphite addition on the tribological properties of composites with polyester-glass recyclate, Materials, 2025, vol. 18 (issue 2), art. no. 376, s. 1-11.

  17. Wieczorska Agata ; Hajdukiewicz Grzegorz: Application of Kolmogorov-Sinai metric entropy to determine the exploitation parameters of epoxy-glass composites with carbonisate, Materials, 2025, vol. 18 (issue 21), art. no. 4858, s. 1-22.

  18. Adam Kaizer, Katarzyna Panasiuk, Julia Parchem Initial analysis of the influence of environmental factors on the strength of transport belts Scientific Journals of the Maritime University of Szczecin, 2025 (no. 82 (154)), s. 42-47.

  19. Lesnau Anna ; Tyliszczak Mirosław: Analysis of the fractional composition of fuel from recycled plastic waste using the low-temperature pyrolysis method, Scientific Journals of the Maritime University of Szczecin, 2025 (no. 82 (154)), s. 12-21.

  20. Żuk Daria, Monografia naukowa: Analiza i ocena właściwości mechanicznych kompozytów przekładkowych z dodatkiem recyklatu gumowego.

2024:

  1. Łastowska Olga, The innovative post-weld finishing method and non-standard cutting tool for carrying out this method, Acta Mechanica et Automatica, 2024, vol. 18 (no. 1), s. 22-28;

  2. Moshentsev Yuryi, Gogorenko Oleksiy, Łastowska Olga, Kubit Andrzej, Analysis of the sum minimization possibilities of heat exchanger core masses in internal combustion engine cooling systems, Applied Sciences, 2024, vol. 14 (issue 1), art. no. 314, s. 1-16;

  3. Łastowska Olga, Starosta Robert, Jabłońska Monika, Kubit Andrzej, Exploring the potential application of an innovative post-weld finishing method in butt-welded joints of stainless steels and aluminum alloys, Materials, 2024, vol. 17 (issue 8), art. no. 1780, s. 1-17;

  4. Blicharska Małgorzata, Szmaglik Iwona, Murawski Lech, Szeleziński Adam, Jasiński Krzysztof, Analyzing the implementation process for the Kaizen Method based on the example of ZSP "LUBIANA" S.A., Scientific Journal of Gdynia Maritime University, 2024 (no. 132), s. 70-84;  

  5. Efremov Cristina, Le Thanh Tuan, Paramasivam Prabhu, Rudzki Krzysztof, Osman Sameh Muhammad, Chau Thanh Hieu, Improving syngas yield and quality from biomass/coal co-gasification using cooperative game theory and local interpretable model-agnostic explanations, International Journal of Hydrogen Energy, 2024, vol. 96, s. 892-907;  

  6. Priya J Chandra, Rudzki Krzysztof, Nguyen Xuan Huong, Nguyen Hoang Phuong, Chotechuang Naruphun, Pham Nguyen Dang Khoa, Blockchain-enabled transfer learning for vulnerability detection and mitigation in maritime logistics, Polish Maritime Research, 2024, vol. 31 (no. 1 (121)), s. 135-145;  

  7. Vang Le Van, Duong Xuan Quang, Bui Van Hung, Rudzki Krzysztof, Van Nhanh Nguyen, Hai Truong Thanh, Exhaust gas heat recovery from a marine engine using a thermal oil system, Polish Maritime Research, 2024, vol. 31 (no. 4 (124)), s. 89-99; 

  8. Abramczyk Norbert, Hajdukiewicz Grzegorz, Charchalis Adam, Żuk Daria, Analysis of mechanical properties in the bending test of epoxy-rubber-glass composites, Materials, 2024, vol. 17 (issue 20), art. no. 5079, s. 1-12 ;

  9. Żuk Daria, Abramczyk Norbert, Panasiuk Katarzyna, Dudzik Krzysztof, Ziegler Burkhard, Analysis of the effect of the addition of aluminum powder on polyester-glass composite properties in tensile and hardness test, Scientific Journal of Gdynia Maritime University, 2024 (no. 129), s. 33-45;

  10. Abramczyk Norbert, Żuk Daria, Jakubowski Piotr, Tests of acoustic insulation of multilayer composite modified with rubber recyclate, Vibrations in Physical Systems, 2024, vol. 35 (no. 1), s. 1-7 ;

  11. D. Żuk, „Analysis of strength parameters of polymer-glass composites modified with rubber recyclate through bending tests”, International Journal of Engineering and Technology Innovation, t. 14, nr 3, s. s. 285, 2024, doi: 10.46604/ijeti.2024.13319.

  12. M. Jabłońska, O. Łastowska: Enhancing of surface quality of FDM moulded materials through hybrid techniques: Materials:

  13. D. Żuk, N. Abramczyk, G. Hajdukiewicz: Analysis of the strenght properties of epoxy-glass composites modified with the addition of rubber recyclate using Kolmogorov –Sinai metric entropy; Materials;

  14. K. Panasiuk, K. Dudzik, G. Hajdukiewicz, N. Abramczyk: Influence of gamma –phase aluminum oxide nanopowder and polyester –glass recyclate filler on the destruction process of composite materials reinforced by glass fiber; Polymers;

  1. Patenty:

  1. K. Łukaszewski: Sposób sterowania adaptacyjnego procesem chłodzenia pary wodnej w skraplaczu, Patent nr 243204; od dnia 2019-05-29, udzielony 2023.07.17 UMG.

  2. O. Łastowska: Wniosek o udzielenie patentu na wynalazek: Zgłoszenie patentowe on-line CTT/03/31122024/Z -Narzędzie skrawające do usunięcia nadlewu spoin;

  3. O. Łastowska: Zgłoszenie wzoru przemysłowego on-line CTT/04/31122024/W – Narzędzie skrawające;

    1. Staże:

  1. O.  Łastowska - Staż naukowy krajowy w ramach mobilności naukowej z 03-04-2023r. po 30-06-2023, Politechnika Rzeszowska, Wydział Budowy Maszyn i Lotnictwa.

2023:

1. O. Dvirna, A. Wieczorska, N. Abramczyk, A. Lesnau: Influence of innovative post-weld finishing method on bead surface quality; Materials, 2023.;

2. K. Panasiuk, K. Dudzik, G. Hajdukiewicz, N. Abramczyk: Acoustic emission and K-S metric entropy as methods to analyze the influence of gamma-aluminum oxide nanopowder on the destruction process of GFRP composite materials; Materials, 2023.

3. D. Żuk, N. Abramczyk, A. Charchalis: Analysis of the impact of rubber recyclate addition to the matrix on the strength properties of epoxy-glass composites; Polymers.

4. N. Abramczyk, D. Żuk, K. Panasiuk: Analysis of the influence of adding rubber recyclate on the strength properties of epoxy-glass composites; Journal of KONBIN; 2023.

5. J. Frost, M. Frycz, , M. Wodtke, W. Litwin: Environmentally acceptable lubricants (EAL) compared with a reference mineral oil as marine stern tube bearing lubricant – Experimental and theoretical investigation: Tribology International.

6. A, Charchalis, M. Kneć, D. Żuk, N. Abramczyk: Use of 3d optical techniques in the analysis of the effect of adding rubber recyclate to the matrix on selected strength parameters of epoxy-glass composites; Acta Mechanica et Automatica, 2023.

7. K. Jasiński, L. Murawski, M. Kluczyk, A. Muc, A. Szeleziński, T. Muchowski, M. Chodnicki: Selected aspects of 3d printing for emergency replacement of structural elements; Advances in Science and Technology Research Journal.

8. Le Thanh Tuan, Nguyen Hoang Phuong, Rudzki Krzysztof, Rowiński Lech, Bui Viet Duc, Truong Thanh Hai, Le Huu Cuong, Pham Nguyen Dang Khoa, Mana: Management strategy for seaports aspiring to green logistical goals of IMO: technology and policy solutions; Polish Maritime Research; 2023.

9. Nguyen Minh Duc, Yeon Ko Tae, Rudzki Krzysztof, Nguyen Hoang Phuong, Pham Nguyen Dang Khoa: Strategies for developing logistics centres: technological trends and policy implications; Polish Maritime Research; 2023.

10. Nguyen Van Nhanh, Rudzki Krzysztof, Dzida Marek, Pham Nguyen Dang Khoa, Pham Minh Tuan, Nguyen Phuoc Quy Phong, Xuan Phuong Nguyen: Understanding fuel saving and clean fuel strategies towards green maritime; Polish Maritime Research; 2023.

11. Nguyen Van Giao, Rajamohan Sakthivel, Rudzki Krzysztof, Kozak Janusz, Sharma Prabhakar, Pham Nguyen Dang Khoa, Nguyen Phuoc Quy Phong, Xuan Phuong Nguyen: Using artificial neural networks for predicting ship fuel consumption; Polish Maritime Research; 2023.

12. Do Van Doan, L. Murawski, A. Szeleziński, T. Muchowski, M. Kluczyk, A. Muc, K. Jasiński, M. Chodnicki: Influence of added water mass on structure vibration parameters in virtual and real conditions; Scientific Journal of Gdynia Maritime University, 2023.

13. K. Jasiński, L. Murawski, A. Szeleziński, M. Kluczyk: Kinematic and dynamic modeling of nonholonomic mobile robot; Scientific Journal of Gdynia Maritime University, 2023.

14. A. Szeleziński, T. Muchowski, K. Jasiński, L. Murawski, A. Kaizer: Outline and possible solutions for network security faults of companies digitized during the pandemic; Funkcjonowanie państwa i organizacji w obliczu kryzysów globalnych; 2023.

15. M. Maliszewski, R. Okroj, K. Jasiński, A. Szeleziński: The Future of Bulletproof Vest Manufacturing in Poland: Challenges, Potential and Prospects; Funkcjonowanie państwa i organizacji w obliczu kryzysów globalnych; 2023.

16. K. Łukaszewski: Computer simulation of the reliability of the heat exchange surface of the steam turbine condenser; Proceedings of the Institution of Mechanical Engineers Part O- Journal of Risk and Reliability; 2023.

17. H. Nguyen: On the q-rung orthopair fuzzy aggregation operators; 2023 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE); 2023.

18. S. Drewing, N. Abramczyk, D. Żuk, T. Dyl: Statistical methods in the analysis of strenght parameters of epoxy –glass composites modified with rubber recyclate; Journal Of Achievements in Materials and Manufacturing Engineering.

19. N. Abramczyk, D. Żuk, A. Czech, A. Charchalis: Using statistical analysis to assess the impact of the addition of rubber recyclate on the trenght properties of the epoxy-glass composite; Journal Of Achievements in Materials and Manufacturing Engineering.

20. K. Jasiński, M. Chodnicki, K. Bobrowski, K. Lipiński, M. Kluczyk, A. Szeleziński: Analysis of the possibilities of applying 3D pront methods fot the needs of ship-bulding industry: Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems: Proceedings of FAIM 2023, June 18-22, 2023, Porto, Portugal.

​

Podmiot udostępniający: 

KatedraPodstawTechniki

Wytworzył informację:

K.Rudzki
29.01.2026